Qubino- Flush 1 Relay- Z-Wave on/off control module for Smart Home with energy measure-up to 2300W

Are your lights on or off?
Not sure?
if you switched your lights off before leaving home?
Control your lights remotely
With Qubino smart home solutions you can check if your lights are on or off
and control them using your smartphone.
Quick and Easy installation
1. Install our Qubino Flush 1 Relay behind the wall light switch,
2. Configure it through your Z-Wave gateway,
3. Control your lights using your smartphone.
So small, so amazing
Flush 1 Relay fits all types of flush mounting boxes worldwide.
Safety
Qubino Flush 1 Relay cares about home safety.
Prevent burglars from breaking into your home.
Simulate your presence at home, by turning your lights
on/off when you’re out.
Control the safety of your home with a single tap.
Why choose Qubino
Designed & Made in Europe
High Quality materials & components
Strict quality control during and after the manufacturing process
Each product is 100% tested and has a serial number that assures traceability
E.U. certificates: LVD (2014/35/EU), EMC (2014/30/EU), RED (2014/53/EU), RoHS 2 (2011/65/EU), ErP (2009/125/EC)
Power supply 110 - 240 VAC ±10%
50/60Hz, (24-30 VDC)
Rated load current of AC output (resistive load)* 1 X 10A / 240 VAC
Rated load current of DC output (resistive load) 1 X 10A / 30 VDC
Output circuit power of AC output (resistive load) 2300 W (240 VAC)
Output circuit power of DC output (resistive load) 240 W (24 VDC)
Power measurement accuracy P = 5–50 W, +/-3 W
P > 50 W, +/-3%
Digital temperature sensor range
(sensor must be ordered separately) -25°C~+80°C (-13~ 176°F), resolution 0.1°C
Operation temperature -10° ~ +40°C (14 ~ 104°F)
Distance up to 30 m indoors (98 ft)
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm / 1,65x1,45x0,66 in
(packaging) 74 x 43 x 86 mm / 2,91x1,69x3,39 in
Weight (including packaging) 24 g (50 g) / 0.85oz (1.76oz)
Electricity consumption 0.4 W
For installation in boxes Ø ≥ 60 mm (2,36 in) or 2M, depth ≥ 60 mm (2,36 in)
Switching Relay
Z-Wave Repeater
Connection Technology:Z-Wave
Energy Measure
External Control
Installation Type:Built-in Module
Requires Neutral