FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
Features :
Battery or VDC powered : When connected to an external, 12/24V DC power source, the battery serves as an emergency power source .
Built-in temperature sensor
May be installed anywhere : Flood sensor’s contacts extended with a wire
Theft protection : tilt is reported to the Z-Wave network or alarm system’s main controller
Alarm is signaled by sound, visual indicator LED .
Two operating modes : flood/temperature sensor or just a temperature sensor.
Mobile notifications : When the CO Sensor detects danger, it instantly starts the alarm scene and immediately notifies you on your mobile device. Wherever you are, you have everything under control.
Support for voice assistants : Fully compatible with Google Assistant and Amazon Alexa voice assistants.
Secure : Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher)

https://youtu.be/8JRxUoHbEN8